Sign frame installation using tape or Velcro is fast and easy with these step-by-step instructions.
This short video shows how easy it is to prep and mount your sign frame with double-sided, very high bond (VHB) tape however, you’d follow the same process in mounting your sign frames with either double-sided foam tape (mild adhesive) or Velcro (hook and loop). In addition, this process would be used across the entire line of Vista System products including directory signs, door signs, office signs and poster frames.
Here’ are the step-by-step instructions:
1. Apply the tape or Velcro to the back of the sign frame
2. Remove the vinyl backing from the tape or Velcro strip
3. Level and mount your sign
Please make sure to test your surface prior to installation. The tape is ideal for installing your sign frames on smooth surfaces and is intended to be permanent. The VHB tape has more aggressive adhesive than its foam counterpart yet both are sufficient to install both office and directory signs. Also, please consult your local building codes for mounting height specifications prior to installation.
Small office signs, cubicle signs or sign frames that might move frequently are better suited for Velcro. All sign frames can be ordered with the tape or Velcro already cut and applied to the frame to expedite the installation process. However, if you’d prefer to do it yourself, especially if you’re installing a large number of office signs at once, you can purchase the tape or Velcro at your local hardware store, office superstore or online to save some money.
We hope you enjoyed the video. If you would like additional product information or alternatives to tape or Velcro sign frame installation please visit our video channel. We welcome your comments so please share or subscribe to our blog.